Firestone SPF17112 Single-Ply LVOC Primer - Quart

Single-Ply LVOC Primer - Quart

Firestone Single-Ply LVOC Primer is a solvent based primer designed to clean and prime RubberGard EPDM membranes to receive seam and cover tapes. Single-Ply LVOC Primer VOC content does not exceed 250 grams per liter and can be used in air quality management districts with VOC limits of 250 grams per liter.

• Coverage is approximately 25-50 linear feet when using with 3"
• 6" Wide tapes 32oz (Quart size) Can

• Mix thoroughly before and during use. Product will appear uniform after mixing
• Surfaces to receive Single-Ply LVOC Primer must be clean, dry and free of foreign materials and excess dusting agent. Clean with broom or rags to remove contaminates
• Apply Single-Ply LVOC Primer at the coverage specified to the splicing surfaces using the QuickScrubber or QuickScrubber Plus pad and handle
• Use back and forth strokes (four minimum) with heavy pressure along the length of the splicing area, until membrane surfaces become uniform in color, with no streaks or puddles
• Additional scrubbing is required where the substrate is contaminated
• Bear down on the QuickScrubber Plus pad and handle system during application
• The pad holder flattens to allow the total surface of the pad to contact with the substrate to receive Single-Ply QuickPrime Primer
• Allow the surfaces to dry completely before applying QuickSeam products. Use touch-push test to determine readiness.
• Dry time will vary due to ambient conditions. Complete seaming procedures per Firestones current specifications and details.